ASA Electronics D413 User Manual

LCM0802TV  
Owner’s Manual  
Audiovox Specialized Applications, LLC  
23319 Cooper Dr.  
Elkhart, IN 46514  
1-800-688-3135  
US PATENT # D413, 856  
FEATURES  
Congratulations on your purchase of the Flexvision  
LCM0802TV drop down TV/Video monitor. The  
LCM0802TV has been designed to give you and your  
family many years of video entertainment in the mobile  
environment. Please read the directions that follow to  
familiarize yourself with the product and to ensure that  
you obtain the best results from your equipment.  
Please note: Installation options vary, see the  
individual owner’s manuals for each component in your  
system to obtain a full understanding of each  
component’s operation.  
8” TFT (Thin Film Transistor) Active Matrix LCD  
(Liquid Crystal Display) Monitor  
OSD (On Screen Display) for control of Picture  
Quality and Functions  
Full Function Remote Control  
Television Tuner  
Plug in RF Transmitter for wireless RF Headphones  
Remote Sensor eye  
Three Audio / Video Sources  
Speaker Amplifier  
Back-lit Controls for Low Light Operation  
Safety Precaution  
For safety reasons, when changing video tapes it is  
recommended that the vehicle is not in motion, and that  
you do not allow children to unfasten seat belts to  
change tapes or make adjustments to the system.  
System adjustments can be accomplished using the  
remote control unit, while seat belts remain fastened.  
Enjoy your Flexvision entertainment system but  
remember- safety of all passengers remains the  
number one priority.  
-3-  
FRONT PANEL FEATURE  
Figure 1  
2 3 4  
1
5 6 7  
8
9
10  
-4-  
FRONT PANEL FEATURES – See Figure 1  
6. Channel Up/Down – Changes the TV channel.  
1. Sensor Eye – Allows the remote control to operate  
the LCM0802TV’s OSD system (On Screen Display),  
volume to wired headphone jacks (and optional  
external speakers), and for control of Video Cassette  
Player and other accessories.  
7. Auto Pro Switch – Auto Program used to program  
local channels into TV memory. Press when vehicle  
is in a new location.  
8. Dome Lights – Provide additional illumination.  
2. Power Button – (Bright red when system is ON, dim  
when system is OFF).  
9. Three position Dome Light Switch  
• Auto – Automatically switched on the dome lights in  
conjunction with the vehicle’s interior illumination.  
• Off – The Dome lights will not turn on in this  
position.  
3. Volume Up/Down – Controls volume to headphone  
jacks and external speakers if connected.  
4. Picture Select – Each time this button is pressed, the  
screen picture adjustment display cycles through  
“adjustment bars” for CONTRAST, BRIGHTNESS,  
COLOR, and TINT. Once the desired adjustment bar  
is displayed, use the VOLUME UP/DOWN buttons to  
adjust the setting. The display will automatically turn  
off if no adjustments are made within 6 seconds, or if  
any other button is depressed.  
• On – Turns on the Dome lights.  
10. Screen release – Slides in the direction of the  
arrow to release the drop down screen.  
5. Select – Used to select on of the three A/V sources.  
-5-  
REMOTE CONTROL OPERATION  
1
6
3
2
BATTERY INSTALLATION  
Before attempting to operate your Remote Control,  
install the batteries as described below.  
1) Turn the remote control face down. Press down  
on the ridged area of the battery cover, and slide  
it off.  
4
9
2) Install two “AAA” batteries as shown. Make sure  
that proper polarity (+ or -) is observed.  
3) Slide the cover back until it clicks into position.  
5
8
11  
12  
The remote control will operate the LCM0802TV,  
Flexvision Televisions and Video Cassette Players.  
It is not a universal remote control and will not  
control equipment from other manufacturers.  
10  
13  
16  
15  
If a universal remote control is used with the  
LCM0802TV, choose the remote control encoding  
scheme for Action Televisions when programming  
the remote.  
14  
-6-  
Remote Controlled TV Functions  
Headphones, or page 12, Wired FM Modulator).  
1. POWER ON/OFF  
Press this button to turn the LCM0802TV on. The  
channel number or current video source will be  
displayed on screen, and the picture will appear in  
a few seconds. Press the button again to turn the  
LCM0802TV off.  
5. PICTURE SELECT BUTTON  
Each time this button is pressed, the screen picture  
adjustment display cycles through “adjustment  
bars” for CONTRAST, BRIGHTNESS, COLOR, and  
TINT. Once the desired adjustment bar is  
displayed, use the VOLUME UP/DOWN buttons to  
adjust the setting. The display will automatically  
turn off if no adjustments are made within 6  
seconds, or if any other button is depressed.  
2. DIRECT ACCESS (0-9) BUTTONS  
Use these buttons to make a direct channel  
selection. The channel number chosen will be  
displayed on the screen for about 4 seconds. The  
direct access is carried out with 0-9 keys (0-99CH).  
The “1__” key will not function as it is only used for  
cable channels above 99.  
6. MUTE BUTTON  
Press this button to shut off the sound at the  
headphone stations. The screen will display the  
volume adjustment bar for 6 seconds, indicating  
that the sound has been turned off. Pressing the  
button again restores sound to the previously set  
level. The mute feature may also be released by  
pressing the VOLUME UP/DOWN buttons.  
3. CHANNEL UP/DOWN BUTTONS  
Use these buttons to advance to the next higher or  
lower channel. See also: SKIP/SEARCH BUTTON.  
4. VOLUME UP/DOWN BUTTONS  
Use these buttons to raise or lower the volume  
level of the external speaker if installed. They are  
also used to make adjustments  
7. TV / VIDEO BUTTON  
Any video equipment connected to the  
AUDIO/VIDEO inputs can be used with the TV by  
pressing this button. Each time the button is  
pressed, the Audio/Video source will change in the  
following sequence VIDEO1, VIDEO2, and TV.  
In picture select mode.  
Note: These buttons will not affect the volume of  
wireless headphones or a wired RF modulator.  
When using these devices the volume must be  
adjusted with the headphone volume control or with  
your radio’s volume control. (See page 11,  
-7-  
8. AUTO MEMORY BUTTON  
REMOTE CONTROLLED VCP FUNCTIONS  
These features can only be used with a Flexvision Video  
Cassette Player, if this option was installed with your  
video package.  
11. POWER BUTTON  
This button is used to turn the VCP on and off.  
12. “REW” REWIND BUTTON  
When the AUTO MEMORY BUTTON is depressed,  
all channels in TV mode are searched and tuned; all  
channels with video signals detected are  
automatically stored. Please refer to page 2 for  
more information on TV reception.  
9. SKIP/SEARCH BUTTON  
If this button is pushed while the tape is stopped, the  
tape will rewind. If this button is pushed while the  
tape is playing, the VCP will go into rewind search  
mode. For more information consult the Audiovox  
VCP owner’s manual.  
This button selects between SKIP and SEARCH  
mode. In “SKIP mode” the TV only stops on  
channels that are programmed into memory when  
the CHANNEL UP/DOWN buttons are used. When  
the SKIP is turned off, the TV will only stop on all  
active channels.  
13. PLAY BUTTON  
Press this button to activate play mode while a tape is  
loaded into the VCP. This button may also be used to  
disengage search and pause modes. For more  
information, consult the VCP owner’s manual.  
14. “FFWD” FAST FORWARD BUTTON  
If this button is pushed while the tape is stopped, tape  
will fast forward. If this button is pressed while the  
tape is playing, the VCP will go into fast forward  
search mode. For more information on the search  
feature of the VCP, consult the VCP owner’s manual.  
15. REPLAY BUTTON  
10. ERASE/WRITE BUTTON  
When tuned to a channel press this button to store  
or erase the channel from memory. The stored  
channel numbers are displayed in “GREEN” on the  
screen, and the non-stored channels are in “RED”.  
When skip mode is on, the LCM0802TV will tune to  
only the stored channels when using the CHANNEL  
UP/DOWN buttons.  
Pressing this button will rewind the tape and  
immediately begin playback when the tape is fully  
rewound.  
16. STOP BUTTON  
Press this button to stop the tape.  
-8-  
CHANNEL TUNING SETUP  
3. To ERASE a channel, press the ERASE/WRITE  
button on the Remote Control Unit until “MANUAL  
MEMORY XX ERASE” is displayed on screen. To  
STORE a channel, press the button until the  
MANUAL MEMORY XX ADD is displayed on  
screen.  
In order to easily access all available channels, it may  
be necessary to perform channel auto-programming  
whenever the vehicle’s geographic location has  
changed, i.e. city to city, weak signal area.  
1. Press the AUTO MEMORY button on the remote  
control unit or the AUTO PROGRAM button on the  
flip down video unit. You will see the TV cycle  
through all it’s channels. The built-in  
Note: Please refer to page 2 for more information on  
TV reception.  
microprocessor will automatically note each  
channel that is actively broadcasting in your area.  
2. (A) To tune only strong clear channels with the  
CHANNEL UP/DOWN buttons, press the  
TURNING THE LCM0802TV ON OR OFF  
1. Sliding the screen release lock forward viewing  
will unlock the screen and it will drop down  
slightly. (Pivot the screen downward until a  
comfortable angle is reached). After the unit  
has been turned on and displaying a picture,  
adjustment to the viewing angle can be made by  
pivoting the screen to optimize the picture  
quality. The internal friction detent will hold the  
screen in position while the system is in use.  
2. Pressing the power button on the pod or remote  
will alternately turn the system on or off. When  
in use the internal back lighting will illuminate  
the controls.  
SKIP/SEARCH button on the Remote Control Unit  
until “SKIP MODE ON” is displayed on the bottom  
of the screen. The TV will now tune only to strong  
active channels when the UP or DOWN buttons  
are used on the monitor or the remote control.  
(B) To tune to weak or marginal channels with the  
CHANNEL UP/DOWN buttons, press the  
SKIP/SEARCH button on the Remote Control Unit  
until “SKIP MODE OFF” is displayed on the bottom  
of the screen. Tune to the desired channel using  
the CHANNEL UP/DOWN buttons or go directly to  
the channel by using the 0-9 buttons on the Remote  
Control.  
3. Remember to turn the unit off and pivot the LCD  
to the locked position when not in use.  
-9-  
OPERATION  
Overhead Dome Lights  
Remote Sensor  
This lights integrated into the LCM0802TV are  
controlled by a three position slide switch. Sliding the  
switch to the on position will turn the lights on. The off  
position will prevent the lights from turning on at all  
times and the auto position will allow the lights to turn  
on and off with the vehicle’s interior lighting. Do not  
leave the vehicle unattended with the dome light  
switch in the on position, as this could result in a  
discharged battery.  
The LCM0802TV incorporates an infrared sensor,  
which relays the signals from the remote control to  
allow the LCM0802TV and VCP to be controlled  
simply by pointing it’s remote control at the remote  
sensor. This provides control of auxialiary  
equipment such as an Flexvision Video Cassette  
Player. The infrared sensor can relay signals from  
any manufacturer’s remote control to it’s respective  
component connected to the Video 1 and 2 inputs,  
such as a DVD player. In this case you must use  
the remote control supplied with the DVD player.  
Dome Light Switch  
Remote Sensor  
-10-  
OPTIONAL ACCESSORIES  
Wireless Headphones  
Auxiliary A/V Stereo Inputs Jack  
The LCM0802TV may be equipped with an auxiliary  
A/V stereo input connector (optional).  
The LCM0802TV includes a RF transmitter (P/N  
WUX) for use with optional Flexvision wireless  
headphones. Tuning the headphone switch on, and  
wearing them activates the internal micro switch,  
(which includes a tuning knob to tune into the preset  
frequency on the RF transmitter), which will activate  
the internal RF receiver and the volume can be  
adjusted separately with the controls on the headset.  
See the documentation accompanying your Flexvision  
wireless headphones.  
These inputs are provided to facilitate the temporary  
connection of optional audio/video equipment, such as  
a camcorder or video game system. To play a source  
with these inputs, an RCA patch cord is required to  
connect the audio/video signals to their respective  
jacks. Mono audio sources will require the use of an  
RCA Y-cable (P/N 0892165) to connect to both right  
and left inputs, if patch cords are installed into the  
AUX inputs, the AUX INPUT 2 will be temporarily  
bypassed. Once the connections have been made,  
turn the LCM0802TV on and press the source button  
on the LCM0802TV or the TV/Video button on the  
remote control until “Video 2” is displayed on the  
screen. The unit will now play the audio and video  
signals from the accessory connected. The remote  
control will not operate the accessory components.  
LCM0802TV Jack Panel  
HEADPHONES AUDIO R AUDIO L  
VIDEO  
HEADPHONES  
-11-  
Flexvision Video Cassette Player (Aux  
Video 1)  
Video Output  
The LCM0802TV provides a video output for an  
optional video monitor(s). This output will provide a  
video signal that duplicates the signal displayed by  
the LCM0802TV to an additional monitor or video  
display. Please see your installer for more  
information.  
In most installations a VCP will be connected to the  
“Video 1” input. To view a video cassette, turn the  
AVP7000/ AVP7285 on and press the source button  
on its control panel or the TV/Video button on the  
remote control unit until “Video 1” is displayed on the  
screen. The VCP may also be operated with the  
remote or the buttons on its face. Inserting a tape  
into the VCP will turn it on and automatically activate  
the play mode. If a rewound tape had been loaded  
into the VCP, prior to its activation press play on the  
VCP or the remote control to view the tape. For  
more information see the owner’s manual  
accompanying your VCP.  
-12-  
TYPICAL SYSTEM CONNECTIONS  
15  
16  
17  
13  
14  
49 MHz  
FM Transmitter  
9
8
7
12  
Negative Dome Light Switching  
10  
6
White -  
Black -  
Red-  
Entry Switch/Negative  
Constant + 12VDC/Dome  
Chassis Ground  
5
4
3
2
1
Positive Dome Light Switching  
White -  
Black -  
Red-  
Entry Switch/Positive  
Chassis Ground  
18  
11  
Constant + 12VDC/Dome  
PIN 1 – Power/Red  
PIN 2 – Power GND/Black  
PIN 3 – Dome Light Auto/White  
PIN 4 – Light GND/Black  
PIN 5 – Dome Light B+ /Red  
PIN 6 – Line Out (L)/White  
PIN 7 – Spk Out (R) /Green  
PIN 8 – Spk Out-GND/Black  
PIN 9 – Spk Out (L)/Grey  
PIN 10 – Video Out/Yellow  
PIN 11 – Video GND/Black  
White RCA(Audio Left)  
PIN 12 – Line Out (R)/Red  
PIN 13 – Power 12V(FM Trans.)/Red  
PIN 14 – Power GND (FM Trans.)/Black  
PIN 15 – Audio (L) Out (FM Trans.)/White  
PIN 16 – Audio GND (FM Trans.)/Black  
PIN 17 – Audio (R) Out (FM Trans.)/Red  
PIN 18 – Line Out GND/Black  
Red RCA(Audio Right)  
Yellow RCA(Video)  
Accessory  
Harness  
4 PIN  
2 PIN IR  
Power  
Connector  
Connector  
-13-  
ACCESSORY LIST  
DESCRIPTION  
AVP-7285 Video Cassette Player (12 Volt)  
FM Modulator  
PART NUMBER  
AVP7285  
0190730  
Wireless Headphone Kit: Includes 2 sets Wireless Headphones and  
transmitter  
WRFKIT1  
AVP-7000 Video Cassette Player (12 Volt)  
Mini-Console (Trim Ring)  
AC2A 2 Amp Adapter for use with Avt-597 5” TV and AVP-7000 Video  
Cassette Player  
AVP7000  
1181300  
0891436  
Unified Remote Control  
VAC-21 12 Volt Corded Vacuum  
AVF-1 12 Volt Rechargeable Flashlight  
HP-175 Headphones with Pivoting Ear Cup  
HP-275 Headphones with Volume Control on Cord  
HP-375 Studio Quality Headphones  
0892325  
VAC21  
AVF-1  
HP175  
HP275  
HP375  
Unlike household electronics, all of our products have been specifically designed and tested for the  
mobile environment and are only available through ASA. To order any of these products, please contact  
*Prices are subject to change  
-14-  
Troubleshooting  
Specifications  
PROBLEM  
SOLUTION  
LCD Brightness  
Resolution  
250 nits (min)  
Poor TV Reception  
Perform auto programming of  
the tuner  
1440 x 234  
336, 960  
-10 ~ 65º C  
- 40 ~ 85º C  
NTSC  
Verify antenna condition.  
NOTE: Due to the nature of TV  
signals, vehicle motion,  
direction the vehicle is facing,  
distance from the transmitter,  
nearby surroundings and  
weather may adversely affect  
TV reception. These  
conditions may result in the  
following: picture roll, “snowy”  
picture, or momentary loss of  
color. Please refer to page 2  
for more information on TV  
reception.  
Pixels  
Operation Temperature  
Storage Temperature  
Video Display System  
Audio Output  
0.6W @ 16  
1.5A  
Poor radio reception (FM  
modulator installed)  
Check the condition of the  
vehicle’s radio antenna.  
Verify that the antenna is fully  
raised  
If a wired RF modulator has  
been installed, verify that it’s  
switch is turned to the off  
position  
Current Draw  
Weight  
3.3 Lbs  
Overall Dimensions  
2.3 x 8.6 x 9.8 Inch  
(H x W x D)  
IR sensor inoperative  
Verify that the batteries in the  
remote are fresh  
Verify that the remote eye is  
not obstructed.  
Verify that the infrared  
transmitter is affixed over the  
sensor eye of the component  
to be controlled  
-15-  
The Mobile Electronics Company  
90 DAY/ 12 MONTH LIMITED WARRANTY  
AUDIOVOX SPECIALIZED APPLICATION, LLC (the Company) warrants to the original retail purchaser of this product that should this product or  
any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original  
purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor. After the initial 90 day  
period and for a period of 12 months from the date of original purchase, the Company will supply at no charge a replacement for any defective  
part(s), but will charge for the labor to repair the product.  
To obtain repair or replacement within the terms of this warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of  
sale), specification of defect(s), transportation prepaid, to an approved warranty station, or the Company at the address shown below.  
This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for  
removal or reinstallation of the product, or to damage to any tapes, speakers, accessories, or electrical systems.  
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper  
installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED  
TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE, AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT.  
This warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WARRANTY. ANY ACTION FOR BREECH OF ANY WARRANTY  
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 DAYS FROM  
THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREECH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is  
authorized to assume for the Company any liability other that expressed herein in connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so  
the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which  
vary from state to state.  
AUDIOVOX SPECIALIZED APPLICATIONS, LLC  
23319 COOPER DR. ELKHART, IN 46514  
UDIOVOX  
PECIALIZED  
PPLICATIONS, L.L.C.  
23319 Cooper Dr.  
Elkhart, IN 46514  
800-688-3135  
Revision A  
1/2002  

Hotpoint HW170GK User Manual
GE General Electric Cooktop PP945 User Manual
GE 27930 User Manual
Gateway VX750 User Manual
Fujitsu Computer Hardware GranPower7000 GP 7000F User Manual
Fisher VMC 8614F User Manual
Electrolux Icon E36IC80ISS User Manual
AT T E1113B User Manual
AMD Computer Hardware GA K8NS PRO 939 User Manual
Addonics Technologies RCED256EU User Manual